EAST ATTACHMENTSCALL NOW336-829-5016

Custom excavator buckets

BUILT AROUND
THE CUT.
FIT TO THE
MACHINE.

Heavy-duty buckets for digging, grading, drainage, sorting and trench work—configured around your excavator and application.

Compare buckets ↓Configure a bucket
East Attachments severe-duty digging bucket
BUCKET RANGE7 PURPOSE-BUILT DESIGNS1.5–70 TON EXCAVATORS · AR400 STEEL
7 TYPESPurpose-built designs
1.5–70TExcavator range
AR400High-wear steel
1 YEAR100% weld warranty

01 / CHOOSE BY APPLICATION

THE RIGHT SHAPE
FOR THE WORK.

Bucket geometry changes production, breakout force, material retention and finish quality. Start with the job—not only the width.

01PRODUCTION DIGGING

Hard ground, excavation and daily material loading.

Digging bucket ↘02GRADING & CLEANUP

Slopes, finish work and high-volume loose material.

Ditching or tilting ↘03DRAINAGE & UTILITIES

Repeatable channels and controlled narrow trenches.

Trapezoid or trenching ↘04SORTING & CONFINED WORK

Separate debris or work precisely around structures.

Skeleton or cribbing ↘

Excavator bucket range

SEVEN DESIGNS.
ONE STANDARD.

Every bucket is discussed and quoted around carrier fitment, material, intended use and available upgrades.

BUILT FOR 1.5–70 TON MACHINES07 BUCKET DESIGNS
EA-DIGBKT
Severe-Duty Digging Bucket by East Attachments in black paint
Excavator

Severe-Duty Digging Bucket

Reinforced production bucket for hard ground, excavation and demanding daily digging.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • General excavation · hard ground
  • Bolt-on side cutters · optional 2-in-1 tooth bar
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-DITCHBKT
Ditching Bucket by East Attachments in black paint
Excavator

Ditching Bucket

Wide, shallow profile for grading slopes, cleanup and moving loose material efficiently.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • Grading · cleanup · slopes
  • Bolt-on cutting edge
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-TRAPBKT
Trapezoid Bucket by East Attachments in black paint
Excavator

Trapezoid Bucket

Flared geometry produces repeatable drainage and utility channels in a single pass.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • Drainage · waterways · utilities
  • Teeth · wings · serrated cutters
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-TILTBKT
Tilting Bucket by East Attachments in black paint
Excavator

Tilting Bucket

Hydraulic tilt control follows contours and finishes grades without constant repositioning.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • Finish grading · contour work
  • Teeth or cutting edge · side cutters · dual cylinder
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-SKELBKT
Skeleton Bucket by East Attachments in black paint
Excavator

Skeleton Bucket

Heavy rib spacing separates fines while retaining rock, debris and demolition material.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • Sorting · screening · cleanup
  • With teeth and side cutters or toothless with cutting edge
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-CRIBBKT
Cribbing Bucket by East Attachments in black paint
Excavator

Cribbing Bucket

Narrow, deep profile controls digging around trench boxes, foundations and structures.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–20 ton machines
  • Confined excavation · foundations
  • Custom width and depth · bolt-on cutting edge
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
EA-TRNCHBKTExcavator

Trenching Bucket

Efficient narrow-width digging for utility, drainage and precise trench profiles.

PINS NOT INCLUDED · SOLD SEPARATELY
  • 1.5–70 ton machines
  • Utilities · drainage · pipework
  • Custom trench width · bolt-on side cutters
  • Approx. 10–15 working days
PRICINGREQUEST QUOTEConfigure & inquire +
DEADLINE-SENSITIVE ORDER?

Lead time varies with current shop volume and configuration. Call before ordering when the bucket is required within a specific time frame.

CALL 336-829-5016

02 / AVAILABLE UPGRADES

SPEC THE
WORKING EDGE.

The cutting edge and side protection should match the material, wear pattern and finish expected from the bucket.

DIGGING BUCKETBolt-on side cuttersOptional 2-in-1 tooth bar
DITCHING BUCKETWide grading profileOptional bolt-on cutting edge
TRAPEZOID BUCKETWith or without teethExtended wings · serrated side cutters
TILTING BUCKETTeeth + side cutters or cutting edgeSingle or dual cylinder
SKELETON BUCKETWith or without teethSide cutters or cutting edge
CRIBBING / TRENCHINGCribbing: bolt-on cutting edgeTrenching: bolt-on side cutters

Machine-specific fitment

YOUR MACHINE
SETS THE MOUNT.

East Attachments verifies the information required for your excavator or coupler before fabrication.

01WITHOUT A QUICK COUPLER

Provide machine make/model plus main-pin diameter, link-pin diameter, center-to-center distance and inside ear width. Pin diameters must be listed in millimeters.

02WITH A QUICK COUPLER

Provide machine make/model, verify the pin diameter in millimeters and identify whether the coupler is manual or hydraulic.

Bucket questions

BEFORE YOU
REQUEST A QUOTE.

How do I choose the correct bucket type?

Start with the primary application, material and desired finished profile. The shop can then recommend geometry, width and wear options around the carrier.

Can East Attachments build a bucket for my quick coupler?

Yes. Provide the machine make/model, pin diameter in millimeters and whether the coupler is manual or hydraulic so fitment can be verified.

Are excavator bucket pins included?

No. Pins are sold separately and can be quoted with the bucket when required.

How long does a custom bucket take?

The approximate lead time is 10–15 working days, but current volume and configuration can change availability.

HAVE THE MACHINE AND APPLICATION?

LET'S SPEC IT.

CONFIGURE A BUCKET ↗